Services

The right pressure for every surface.

Pressure washing is the core of what we do. Every surface gets the method it needs, so it comes out clean without getting damaged.

Why pressure matters

Too much ruins it. Too little doesn’t clean it.

Most damage from pressure washing comes from using one setting for everything. Pick a surface to see how we set up for it.

0K1K2K3K4KSOFTPSI
0PSI

Pressure washing

What we clean, and how.

Five services, each with its own setup. Bundle two or more in one visit and save 10%.

3,000 PSI · surface cleaner

Driveways & walkways

Flat concrete gets cleaned with a rotary surface cleaner, not just a wand. That's what gives you an even, stripe-free finish across the whole slab. We pre-treat oil and rust-colored spots, then rinse the edges, the curb and the street gutter.

  • Driveway, front walk and sidewalk
  • Pre-treatment on oil and organic stains
  • Surface cleaner for an even, stripe-free finish
  • Edges, curb and gutter rinsed clean
ConcreteExposed aggregateStamped concreteGarage aprons
Estimate this From$125
Soft wash · under 500 PSI

House washing (soft wash)

High pressure can crack stucco, strip paint and push water behind siding. A soft wash uses a cleaning solution to break down algae and dirt, then a low-pressure rinse carries it away. The result lasts longer, because it kills the growth instead of only knocking off the top layer.

  • Full exterior walls, eaves and soffits
  • Gutter faces and trim brightened
  • Plants pre-wet and rinsed after
  • Windows rinsed (not detailed)
VinylHardie boardStuccoPainted wood
Estimate this From$275
1,500 PSI · pre-treat

Brick & stone

Brick and stone look tough, but old mortar is soft. We pre-treat to loosen the growth, then rinse at a moderate pressure so the joints stay intact. Black streaks under windows and green growth near the ground are the most common things we take off.

  • Pre-treatment for algae and streaking
  • Moderate-pressure rinse that protects mortar
  • Window sills and ledges cleaned
  • Walkway rinsed of runoff
BrickNatural stoneCast stoneChimneys (ground level)
Estimate this From$175
2,000 PSI · joint-safe

Patios & pool decks

Pavers need enough pressure to clean, but not so much that it blows the sand out of the joints. We work at a moderate pressure, clean the pool coping by hand where needed, and can re-sand the joints as a special request.

  • Patio, pool deck and coping
  • Mildew and grime cleared from joints
  • Furniture moved and put back
  • Re-sanding available on request
PaversConcrete patiosPool decksFlagstone
Estimate this From$100
500–1,200 PSI · fan tip

Decks & fences

Wood is the easiest surface to damage. Too much pressure leaves fuzzy, splintered boards. We use a wide fan tip at low pressure and a wood-safe cleaner that lifts the grey oxidation, then let it dry before any stain goes on.

  • Deck boards, rails and stairs
  • Fence boards, one or both sides
  • Wood-safe cleaner for grey oxidation
  • Staining and sealing available on request
CedarPinePressure-treatedComposite
Estimate this From$150
Special requests

Beyond pressure washing: the rest of the house.

34 more home services, all by request. Pressure washing is what we do every day; these we schedule case by case. Send the details and we’ll tell you straight whether we can do it and what it costs.

Questions

Good to know before we come out.

Will pressure washing damage my siding or paint?

Not the way we do it. Siding, stucco and painted surfaces get a soft wash: a cleaning solution breaks down the growth and a low-pressure rinse removes it. High pressure is only for surfaces that can take it, like concrete.

Do I need to be home?

No. We need access to the areas being cleaned and an outdoor water spigot. Most customers leave the gate unlocked and we send photos when we’re done. We do the final walk-through by phone if you’re away.

What about my plants and lawn?

We wet plants down before we start, cover delicate beds, and rinse everything again after. The cleaners we use are made for residential work and are diluted before they touch anything.

How long does a job take?

A driveway takes one to two hours. A full house wash usually takes two to four. Bundles are often done in a single visit.

How do you price?

By surface and size. The instant estimate gives you a range in under a minute. We confirm the final price in writing before any work starts, and it doesn’t change unless you add to the job.

What if it rains?

Light rain is fine for most jobs. If storms are coming, we reschedule at no cost and let you know the day before.

Free quote

Your place, minus the grime.

Get a price range in under a minute, then a written quote within one business day.

Call Instant estimate